Connection Of The Stacker - Electrolux Professional IC6 48 FFS Series Installation Manual

34

3.3 Connection of the stacker

You can adjust the height of the stacker with the ironer by adjusting the screw (S) fixing the 4 wheels (W) inside
the casing of the stacker. To do this, remove the rear and lateral housings and the plate (P) to access to the
screws (S).
Place the stacker (A) on the right of the dryer ironer (B) and centre it with the finger in the slit of the machine.
Lock the stacker in position with the clamping pads.
Installation manual
Important