Table of Contents
Advertisement
18
2 Handling
It is obligatory that all these operations are undertaken by handling specialists.
2.1 Unpacking
You should have found an instruction handbook and keys to open the machine casings, in the machine.
Depending on its destination, the ironer is delivered bare or may be placed on a transport pallet and/or packed with
plastic film.
In some cases, it may be delivered in a crate, or in maritime packing (wood box).
Take off the plastic film or remove the wood with a spanner.
Check that no damage has been caused during transport.
2.2 Lifting with a fork-lift truck
You should never handle the machine in its longitudinal side (any other than shown on the drawing below) with a
fork-lift truck. Important risk of parts deterioration for those fixed under the machine.
This can be carried out from the front or back, and at the centre of the machine using forks with minimum length of
1.50 m (59") and only with the pallet.
Installation manual
Important
Caution
Warning
Advertisement
Table of Contents
