Installation manual
21
3 Installation :
3.1 Installation
The ironer must be transported to its final position in the laundry before the pallet is removed.
The installation must be done by competent technicians in accordance with local codes and regulations. When there
are not local codes and regulations, the installation must be comply with European standards applicable.
The machine must be installed on a perfectly even surface, strong and horizontal, capable resisting to the efforts
shown in the technical characteristics.
Degrease carefully the ground and the soles of the machine.
If there is a carpet, it is recommended that it should be removed from the part of the floor on which the machine is to
be supported.
• Control the horizontal level using a water level placed on the machine's sole.
• Leave a minimum space of 5 mm between the floor and the cases , The ironer must be on its four adjustable feet.
• Place the ironer so that it is easy for the user and the service technician to do their work.
• Leave at least 1 meter (40") (according to the recommendation in standard EN 60204) between the machine, a
wall or any other machine at the sides.