Lifting With Handlings Straps; Moving Along The Ground; Handling The Stacker - Electrolux Professional IC6 48 FFS Series Installation Manual

20

2.3 Lifting with handlings straps

Lifting in that case can only be done with handling straps (C : minimum capacity 2500 daN / L : minimum length 4m)
which bear weight of the machine.
Make sure to place the straps correctly to avoid any bending of parts of the machine.
In order to avoid any bending of casings, you should never climb and stand on top of the machine.
2.4

Moving along the ground

The machine frame is made up of two parallel spars, making ground moving possible by means of rollers, grinding
tracks or a trolley.
The two handling angles (B) can be used to lift the machine using hydraulic jacks or poles, so that rollers can be slip-
ped under the girder.

2.5 Handling the stacker

The stacker can be lifted using handling straps (C : minimum capacity : 500 daN ) able to support the weight of the
stacker.
The stacker can also be wheeled over a smooth flat surface using its 4 wheels (A).
Installation manual
Caution
Caution