16
1.6 Locking and tagging procedure
A red insert at the beginning of this instruction handbook schematically shows the locking and tagging procedure de-
scribed below. If you wish, you can detach this insert and display it close to the machine to remind maintenance per-
sonnel of the safety instructions.
Installation manual
Always respect items 2, 3 and 4 carefully before doing any repair or maintenance work on
the machine.
Warning, begin this procedure when the ironer is cool down !!!
Put the main switch to Off
and lock the handle with a
padlock in one of the
three holes provided for
this purpose.
Open the fixed protectors
(casings, doors) with the
key provided or a special
tool.
Close and carefully lock the fixed protectors.
Close the stop valves for
the other supplies (steam,
gas, thermal fluid, com-
pressed air) to stop and
lock their handle with a
padlock.
Do the maintenance.