2-7.4 Jp2: Anti-Burn Shield (Absii) - SOLTEK NV400-64 Manual

2-7.4 Jp2: Anti-burn Shield (ABSII)

Jp2 is designed to enable the overheat safeguard for some CPUs which
are incorporated with a protective thermal diode. The latest AMD Athlon
XP and Duron Morgan CPUs are incorporated with such thermal diode
and can be protected by this function. Setting Jp2 1-2 closed (default
setting) will get system shutdown when the above-mentioned CPUs get
o
to 85 C (the default protection temperature.) Only when the CPU re-
turns to a cooler state can you restart your system.
For other CPUs that are not incorporated with a protective thermal diode,
please set Jp2 2-3 closed to disable the function because it is a vain
design now.
Reminder: If a sudden shutdown happens to your system which has
been running well for a while with an AMD Athlon XP/ Duron Morgan
CPU, this might be caused by the "Overheated CPU Shutdown" design.
Please use a better CPU cooling fan and restart your system.
Jp2:
Anti-burn Shield (ABSII)
(Overheated CPU Shutdown)
(only for Athlon XP/
Duron Morgan)
1-2 closed (default)
To enable overheated CPU
1
o
(85 C) shutdown function
2-3 closed
To disable overheated
1
CPU shutdown function
27
Chapter 2 Hardware Setup