Blanking Signaling - Datasensing SH4 ADVANCED Product Reference Manual

FUNCTIONS

Blanking Signaling

The blanking signaling will switch on if blanking is violated when detected object size <
Minimum Object configured.
The User Interface Dialogue will signal any potential risks from blanking (see "Invalid
Blanking/ Partial Muting" on page 90). An external lamp can be added as a signaling
device (LAMP output, "see "Electrical Connection" on page 78).
In addition, the light curtain UI will signal (see "Blanking Active" on page 90) if the
blanking function is active and the OSSDs are ON.
84
SH4 ADVANCED