Datasensing SH4 ADVANCED Product Reference Manual page 31

To mount the angled fixing brackets kit, place the threaded pins metallic insert into the
dedicated side seat of the terminator cap side light curtain closing cap (1); slide the
insert towards the metallic drawn profile groove (2).
Fix the bracket against the profile by tightening the M5 hexagonal nuts (3-4). It's possi-
ble to slide the bracket group along their dedicated rail and fix it once again just working
on the above-mentioned nuts.
1)
2)
3)
4)
Figure 18: Fixed brackets mounting procedure
In case of applications with particularly strong vibrations, vibration dampers, together
with mounting brackets, are recommended to reduce the impact of the vibrations.
Figure 19: Anti-vibration dampers
PRODUCT REFERENCE GUIDE
23