Chapter 5. Sh4 Designer - Datasensing SH4 ADVANCED Product Reference Manual

CHAPTER 5
SH4 DESIGNER
The user select among advanced functions/advanced parameters by means of a Multi-
platform Software App running on PC or mobile phones (Available for RX only).
The App allow users to connect to a Safety Light Curtain by means of a wireless network
generated by the light curtain itself.
The Wi-Fi connection is point-to-point: the light curtain generate a wireless network
with unique SSID containing it's Serial Number and Model with password encrypted
with WPA2.
SH4 Designer App for PC or mobile devices allows the user to: set ESPE advanced config-
uration, firmware update, change device password, change network password, moni-
toring the device status and restore the default configuration. Many parameters are
available to customize ESPE behavior for specific applications.
Since ESPE parameter can be safety critical and PC software cannot be guaranteed as a
safety component a safe configuration procedure has to be followed.
Configuration procedure on user interface can be done by authorized personnel only.
Such personnel must be sure that protected dangerous machine has no access during
configuration procedure.
OPERATIONS
1. Device selection: user connects to the SSID of the Wireless network generated by
32
SH4 ADVANCED
NOTE: Internet on your device may not be available in this case.
connection
DEVICE
SELECTION
NORMAL OPERATION
Figure 25: Advanced Configuration Cycle
the light curtain to configure, identified by a unique Serial Number and Model. If
the light curtain is set to access a different access point, the user connects to the
same, then select one ESPE to configure choosing between devices on the net-
work identified by a unique Serial Number.
PLANT STATUS
NO ONE ACCESSING DANGEROUS MACHINE
configure
PARAMETERS REPORT
SELECTION
CHECK
SAFE
ESPE STATUS
OPERATIONS
accept
ESPE
CHECK
NORMAL OPERATION