Model Description - Datasensing SH4 ADVANCED Product Reference Manual

MODEL DESCRIPTION

SH4 safety light curtains are described by their model description which indicates the
characteristics listed in the diagram below. Not all combinations are available. For a
complete list of combinations see the Models tab on the Product page of the website.
Detection
capability or
n. of beams
14 mm
30 mm
2 beams
3 beams
4 beams
Automatic Restart
1. 1 Up to 5 simultaneous fixed or floating blanking zones can be used.
2. The response time depends on model height and the activation of anti interference code: for details refer to Response
SH4 - xx - xxxx - x - x - x
Monitored
height in mm
300 to 2250
NOTE: For 14/30 mm resolutions protected height starts from 300 mm up
to 2250 mm with 150 mm modularity.
BASE STANDARD
- By wiring
times table
NOTE: This Product Reference Guide describes the ADVANCED models. For
Standard Muting and Base/Standard models refer to relative Product Ref-
erence Guide.
Functionality
B = Base
S = Standard
SM = Standard Muting
A= Advanced
C = Cascade
STANDARD MUTING
FUNCTION
Manual / Automatic Restart
Reset
External Device Monitoring (EDM)
Alignment Function
2-signals T Muting / L Muting
Single Override
2-signals muting dependent Override
Partial muting (half protection height)
Muting input filtering and timeout setting
Anti-interference coding
CONFIGURATION
By Dip-Switch
MODEL DESCRIPTION
Rx main Rx secondary
connector connector
5 pin M12 5 pin M12
8 pin M12 none
12 pin M12
ADVANCED
4-signals Muting
Dynamic partial muting
Partial Muting
(at beams level)
1
Fixed Blanking
External signal fixed
blanking teach-in
Floating Blanking
Reduced resolution
Integrated aimer
By APP via Wi-Fi
PRODUCT REFERENCE GUIDE
2
3