I/O Configuration; Input Signals; Output Signals; Signals Logic Level - Datasensing SH4 ADVANCED Product Reference Manual

CONNECTIONS

I/O Configuration

The input and output signals must be assigned to the dedicated pins and configured.
Below is the list of signals that can be configured:

Input signals

•
•
•
•
•
•
•
•
•
•
•
•

Output signals

•
•

Signals Logic Level

For some signals, it is possible to set the type of logic level HIGH or LOW. Below is the
list of signals for which it is possible to set the logic level:
•
•
•
•
•
•
•
•
•
•
28
SH4 ADVANCED
NOTE: In order to configure the I/O, refer to "Input Output Manager" on
page 41.
Restart
EDM
Muting 1
Muting 2
Muting 3
Muting 4
Muting Enable
Override 1
Teach In
Beam Tolerance
Align
Reset
Lamp
Override Status
Align
Restart
Reset
Muting 1
Muting 2
Muting 3
Muting 4
Muting Enable
Teach-in
Override Status