ANTI INTERFERENCE CODING
Anti-Interference Coding function implemented in SH4 devices allows the user to install
two light curtains very close each other without that an interference occurs; this allows
the devices to remain in normal operation condition.
Configuration RX
In "Configuration" tab, choose the "Code" function by checking the code box desired.
Configuration TX
TX unit will select emission code based on CODE input connection (pin 4, M12-5 TX con-
nector) at light curtain startup:
CODE INPUT CONNECTION
NOTE: For correct light curtain operation both emitter and receiver unit
must be configured with the same Coding setting.
AT STARTUP
COM
0V/FLOAT
24V
ANTI INTERFERENCE CODING
EMISSION CODE
CODE1
NO CODE
CODE 2
PRODUCT REFERENCE GUIDE
61