Disconnecting Cables; Installing Or Changing The Battery - Symbol P360 Quick Reference Manual

4

Disconnecting Cables

Most hosts require RS-232 cables. All other hosts require Synapse cables. To
disconnect the Phaser scanner cable:
Power down all devices connected to the Phaser scanner cable.
1.
Remove the cable by turning the cable twist-lock 1/8 turn counter-clockwise
2.
and pulling the cable out.

Installing or Changing the Battery

Slide the battery compartment release latch down and remove the battery
1.
compartment cover.
Battery
Compartment
Cover
Turn the cable twist-lock 1/8 turn clockwise to
3.
seat it.
Gently pull the cable to ensure it is properly
4.
seated.
Plug the other end of the cable to the host
5.
computer.
P360/460 Memory Scanners
Battery
Release
Latch