Ricoh IM 2500 Series User Manual page 70

2. Getting Started
1. Place the originals flush against the rear paper guide and adjust the paper guides to the
size of the originals.
2. Place the aligned originals squarely face up in the one-pass duplex scanning ADF.
Place the originals with the first page facing up.
Fan sheets before loading so that multiple originals do not stick to each other and are not fed at
once. If the edge of the paper is not cut well, the edges of the paper curl back, forming what are
called burrs. Before you set originals with burrs, fan the originals carefully.
Load the originals by placing them flush against the rear paper guide.
Do not stack the originals beyond the limit mark.
68
DZW110
D0CHIA5718
D0CHIA5719