Ricoh IM 2500 Series User Manual page 262

10. Troubleshooting
Message
"Booklet/Half Fold
is not available with
the settings. The job
has been
cancelled."
"Cannot access the
Memory Storage
Device."
"Cannot store data
of this size."
"Classification Code
is incorrect. The job
has been
cancelled."
"Collate has been
cancelled."
260
Cause
A setting in which Check the setting for the availability of the Booklet or
Booklet or Half-fold Half-fold function.
cannot be
page 302 "List of Specifications"
performed was
specified, and
printing was
canceled.
An SD card or USB • Check that the external media is formatted in
flash memory
device is
unavailable for use.
• Check that the external media is not corrupted or
The paper size is Reduce the paper size of the document to send. The
too large. document to send cannot be stored at a custom size.
A classification Consult the machine administrator for the classification
code is not code, and enter the code in [Classification Code] in
specified. "Detailed Settings" on the [Basic] tab
"Job Type" in the printer driver.
The document was Request the machine administrator to change the setting
printed in a printer of the classification code. Machine administrator:
driver that does not Change [Classification Code] to [Optional] in Web
support the Image Monitor if necessary.
classification code.
See "Managing the Number of Printed Sheets Using the
Classification Code", User Guide (Full Version).
The sort function Turn off the power of the machine, wait for 10 seconds
was canceled. or more after confirming that the main power indicator
is turned off, and then turn on the power.
page 17 "Turning On and Off the Power"
Solution and reference
FAT16 or FAT32, and write protection is not
enabled on the media.
damaged.
[Modify] under