Messages That Appear When The Ldap Server Is Unavailable - Ricoh IM 2500 Series User Manual

Message
"The card authentication
device is not connected."

Messages that Appear When the LDAP Server Is Unavailable

Message
"Connection with LDAP
server has failed. Check
the server status."
"Exceeded time limit for
LDAP server search.
Check the server status."
Cause
The card authentication
device has been
removed or is not
connected properly.
A malfunction is
temporarily occurring
on the machine.
Cause
The network is busy.
The setting information is
incorrect.
The network is busy.
The setting information is
incorrect.
When Other Messages Appear
Solution and reference
Connect the card authentication device again.
Connect the card authentication device to the
USB2.0 Interface Type A on the back left side
of the machine.
Turn off the power of the machine, wait for 10
seconds or more after confirming that the main
power indicator is turned off, and then turn on
the power.
page 17 "Turning On and Off the Power"
Solution and reference
Try again.
Check the setting information of [Settings]
[System Settings] [Settings for
Administrator] [Authentication/Charge]
[Administrator Authentication/User
Authentication/App Auth.]
Change/Delete LDAP Server].
See "Registering the LDAP Server", User Guide
(Full Version).
Try again.
Check the setting information of [Settings]
[System Settings] [Settings for
Administrator] [Authentication/Charge]
[Administrator Authentication/User
Authentication/App Auth.]
Change/Delete LDAP Server].
See "Registering the LDAP Server", User Guide
(Full Version).
[Register/
[Register/
297