Ricoh IM 2500 Series User Manual page 267

Message
"Hardware Problem: An error has
Wireless Card" occurred in the
Wireless LAN
board.
"HDD is full." The area reserved
for forms or fonts in
PostScript 3 is full.
"HDD is full. (Auto)" An overflow error
occurred in the hard
disk while storing a
document printed
by Normal Print as
a Hold Print job by
the error job storing
function.
"I/O buffer An overflow has
overflow." occurred in the
receive buffer.
"Information for user In LDAP
authentication is authentication, the
already registered same name is
for another user." registered under
different IDs on
different servers,
and duplicate
names (account
names) occurred
such as when
switching the
domain (server).
"Insufficient The amount of
Memory" available memory is
insufficient.
When a Message Appears While Using the Printer Function
Cause
Turn off the power of the machine, check that the
Wireless LAN board is correctly installed in the
machine, and then turn on the power.
page 17 "Turning On and Off the Power"
If the message persists even after you have turned the
power off and then on, consider repairing the machine.
Delete a registered form or font that is no longer
necessary.
• Reduce the size of the document to print.
• Erase documents that are no longer needed.
See "Deleting Documents Stored in the Machine",
User Guide (Full Version).
See "Erasing Documents from Document Server",
User Guide (Full Version).
• Reduce the transmission data.
• Increase the value in [I/O Buffer] on [Settings]
[Printer Settings]
Consult the user administrator. User administrator:
Delete the corresponding user from the address book,
and register the user again after resolving the duplicate
names on different servers.
Decrease [Resolution] in the printer driver.
See "Applying Different Print Settings Depending on the
Document Type", User Guide (Full Version).
Solution and reference
[Host Interface].
265