Ricoh IM 2500 Series User Manual page 106

4. Fax
1. Press [Fax] on the Home screen.
2. Place the original in the Auto Document Feeder (ADF) or on the exposure glass.
See "Setting an Original to Send by Fax on the Scanner", User Guide (Full Version).
3. To send a notification e-mail to the sender, press [Settings]
the sender.
When a login user is operating the machine, the login user becomes the sender.
The e-mail address that you selected for the [Use as Sender] check box when registering the
address will be used as the e-mail address of the sender.
See "Registering E-mail Addresses in the Address Book", User Guide (Full Version).
4. Select the [Notification of Result] check box, and then press [OK].
5. To send a notification e-mail to a destination other than the sender, press [Notification of
Result] on the [Settings] screen, and then specify the destination of the e-mail.
6. Configure the scan settings.
See "Sending a Fax at the Image Quality Suitable for the Original", User Guide (Full Version).
7. After configuring the send settings, specify the destination on the fax screen, and send the
fax.
page 93 "Basic Procedure for Transmitting Faxes"
See "Basic Procedure for Sending Internet Faxes", User Guide (Full Version).
104
DZX317
[Sender], and then specify