Ricoh IM 2500 Series User Manual page 269

Message
"Paper size and/or The paper size or
type mismatched or paper type
no ppr. in Bypass specified in the
Tray." printer driver does
not match the paper
settings, in the
machine, for the
bypass tray.
"Paper size and type The paper tray
are mismatched. loaded with paper
Select another tray of the size or type
from the following specified in the
and press printer driver is not
[Continue]. To available.
cancel job, press
[Job Reset]. Paper
size and type can
also be changed in
User Tools."
"Parallel I/F board An error has
has a problem." occurred in the
parallel interface.
"Printer font error." There is a problem
in the font file of the
machine.
"Print overrun." A page image is
discarded while
printing the page.
When a Message Appears While Using the Printer Function
Cause
Specify [Driver/Command] in [Settings]
Paper Settings]
[Bypass Tray].
• To proceed with printing after changing the paper
setting, select a tray and press [Print]. When
Staple, Punch, Fold, Cover Sheet, Slip Sheet,
Chaptering, or Designate is specified, or when
Duplex printing is specified on a paper tray that
does not support the function, printing cannot be
performed. When Sort is specified, only one copy
of the document is printed.
• To proceed with printing on the specified paper,
load the paper and then check that the paper size
and type are correctly specified in [Settings]
[Tray/Paper Settings].
page 183 "Loading Paper into the Paper Tray"
Turn off the power of the machine, wait for 10 seconds
or more after confirming that the main power indicator
is turned off, and then turn on the power.
page 17 "Turning On and Off the Power"
If the message persists even after you have turned the
power off and then on, consider repairing the machine.
Consider repairing the machine.
Decrease [Resolution] in the printer driver.
See "Applying Different Print Settings Depending on the
Document Type", User Guide (Full Version).
Solution and reference
[Printer] [Tray Setting Priority]
[Tray/
267