2. Getting Started
Guide to Names and Functions of Components
• Do not obstruct the machine's vents. Doing so can result in fire as the internal components are
overheated.
Front and Left View
1
2
3
1. Exposure glass cover/Auto Document Feeder (ADF)
Lower the cover over originals placed on the exposure glass.
If you load a stack of originals in the ADF, the ADF will automatically feed the originals one by one.
page 64 "Placing an Original in the Auto Document Feeder (ADF)"
2. Exposure glass
Place originals face down here.
page 62 "Placing an Original on the Exposure Glass"
3. Vents
Prevent overheating.
After large-volume printing, the ventilation fan may continue to work to lower the temperature inside the
machine.
22
4
7
5
6
8
9
D0CHIA0407