Ricoh IM 2500 Series User Manual page 228

10. Troubleshooting
Sound pattern
Five long beeps
(repeating four times)
Five short beeps
(repeating five times)
12 short beeps
*1 The factory default sound pattern is used as an example in the table above.
• You cannot pause an alert sound that has started. The machine continues to emit the sound until the
preset sound pattern is completed.
• You can specify the volume and type of alert sound in [Settings]
The type of sound can be specified for each condition described in the table above. You can also
specify the volume of the sound emitted when using On-hook or Immediate Transmission to send a
fax in [Settings]
specifying the settings.
• See "Setting the Sound Volume and Type", User Guide (Full Version).
226
*1
Condition
Caution Sound
Copy: Forgot Original Sound
Scanner: Forgot Original
Sound
Fax: Forgot Original Sound
Warning Sound
Blank Page Detected Sound
[Fax Settings] [Others]
Check that an original is not left on the
exposure glass and that paper is
loaded in the paper tray.
Check the message displayed on the
screen, and resolve the problem by
removing the jammed paper or
original, or replacing the toner.
Check that the original is placed in the
ADF with the side to scan facing up.
[System Settings]
[Adjust Sound Volume]. Press [Home] (
Solution
[Sound].
) after