Series Specifications - CKD IO-Link FCM Series Manual

Pressure
Standard differential pressure, working pressure differential *4, 5
(Standard model)
Standard differential pressure (kPa)
AI Working pressure differential (kPa)
Max. working pressure (kPa)
Standard differential pressure (kPa)
AR Working pressure differential (kPa)
Max. working pressure (kPa)
Standard differential pressure (kPa)
O2 Working pressure differential (kPa)
Max. working pressure (kPa)
Standard differential pressure (kPa)
LN/C1 Working pressure differential (kPa)
Max. working pressure (kPa)
Standard differential pressure (kPa)
C3
Working pressure differential (kPa)
Max. working pressure (kPa)
(Low differential pressure model)
Standard differential pressure (kPa)
AI/O2
LN/C1 Working pressure differential (kPa)
C3
Max. working pressure (kPa)
*8
Display, integrating functions
Display range
Flow rate
display
Display resolution
Display range
Integrating
Display resolution
functions *9
Pulse output rate
*1: The value converted to volumetric flow rate at standard condition (20 °C 1 barometric pressure (101 kPa) relative humidity 65%). Full scale stands for max.
scale flow rate in the flow rate range.
*2: Use dry gas which does not contain corrosive elements such as chlorine, sulfur or acids, and which is clean and does not contain dust or oil mist.
When using compressed air, use clean air compliant with JIS B8392-1: 2012 (ISO 8573-1: 2010) [1: 1: 1 to 1: 6: 2]. Compressed air from the compressor
contains drainage-water, oil oxide, foreign substances, etc. To maintain the function of this product, install a filter, air dryer (min. pressure dew point 10˚C or
less), and oil mist filter (max. oil concentration 0.1 mg/m
[Recommended circuit]
Filter
Pneumatic Air dryer
source
[Recommended device]
Air filter: F Series
Oil mist filter: M Series
*3: The value for city gas 13A is a value for methane (CH
*4: Standard differential pressure is the differential pressure when this product is calibrated. (Secondary side released to atmosphere)
*5: Working pressure differential is the differential pressure required for normal operation of this product. Note that the values depend on the flow rate range and
applicable product(s) fluids. The min. value of the working pressure differential is the differential pressure required for the full scale flow rate to flow when secondary
side is released to atmosphere. The max. working pressure (max. value of working pressure differential) is the max. value of primary side pressure. If more
pressure is applied, control may become unstable, or the max. flow rate may not be controllable.
*6: Ensure that the current supply capacity per IO-Link master port is sufficient.
*7: This product's protection circuit is effective only for specific misconnections. It does not provide protection for all misconnections.
*8: The low pressure line (1 to 2.5kPa) of city gas is outside the working pressure differential range.
*9: The accumulated flow is a reference value. It is reset when the power is turned OFF
*10: The valve inside this product cannot be used as a stop valve requiring zero leakage. Slight leakage is allowed for in the specifications.
9500 0001
50 100
20 to 150 50 to 200
150 200
50 100
20 to 150 50 to 200
150 200
50 100
20 to 150 50 to 200
150 200
50 50
20 to 150 20 to 150
150 150
50 50
20 to 150 20 to 150
150 150
L9500
20
5 to 50
50
9500 0001
L9500 L0001
0 to 500 mL/min 0.00 to 1.00 L/min 0.00 to 2.00 L/min 0.00 to 5.00 L/min 0.0 to 10.0 L/min 0.0 to 20.0 L/min 0.0 to 50.0 L/min 0 to 100 L/min
1 mL/min 0.01 L/min 0.01 L/min 0.01 L/min
999999 mL 9999.99 L 9999.99 L 9999.99 L 99999.9 L 99999.9 L 99999.9 L
1 mL 0.01 L
5 mL 0.01 L
3
) on the primary side (upstream side) of this product.
Oil mist filter
(Micro alescer)
Regulator FCM Series
) 88% gas generated from LNG.
4
Flow rate range *1
0002 0005 0010
100 100 100
50 to 250 50 to 250 50 to 250 100 to 300 150 to 300 250 to 350
250 250 250
100 100 100
50 to 250 50 to 250 50 to 250 100 to 300 150 to 300
250 250 250
100 100 100
50 to 250 50 to 250 50 to 250
250 250 250
50 50 50
20 to 150 20 to 150 30 to 150
150 150 150
50 50 50
20 to 150 20 to 150 30 to 150
150 150 150
Flow rate range *1
L0001 L0002
20 20
5 to 50 5 to 50
50 50
Flow rate range *1
0002 0005 0010
L0002 L0005 L0010
0.1 L/min
0.01 L 0.01 L 0.1 L
0.02 L 0.05 L 0.1 L
FCM
Series
Specifications
0020 0050 0100
150 200 300
300 300 350
150 200
300 300
L0005 L0010
20 20
5 to 50 10 to 50
50 50
0020 0050 0100
0.1 L/min 0.1 L/min 1 L/min
999999 L
0.1 L 0.1 L 1 L
0.2 L 0.5 L 1 L
2