僅 Setting The Power Liftgate - Kia Sorento 2023 Owner's Manual

Features of your vehicle
Automatic reverse
During power liftgate operation if the
power liftgate senses any obstacle, the
liftgate will stop or will fully open. The
automatic reverse feature may not oper-
ate properly, or it may operate unex-
pectedly under the following
circumstances:
僅 The automatic reverse feature may
not detect the resistance if the
detected resistance is below a certain
level, or if the liftgate is almost fully
closed near the latched position.
僅 The automatic reverse feature may
operate if a strong impact is applied
with no obstructions placed.
WARNING
Never intentionally place any object or
part of your body in the path of the
power liftgate to make sure the auto-
matic reverse feature operates. Serious
injury, or damage to the vehicle or object
may occur.
INFORMATION
The power liftgate may stop operating if
the automatic reverse feature operates
more than two times while attempting to
open or close the liftgate. If this occurs,
carefully open or close the liftgate man-
ually, and then after 30 seconds try to
operate the power liftgate automatically
again.
Setting the power liftgate
To use each feature, you must select the
opening speed or opening height from
the settings menu. Deselect the settings
when you do not want to use the fea-
ture.
Power liftgate opening speed
To adjust the power liftgate speed,
select 'User Settings → Door/liftgate →
Power liftgate Opening Speed → Fast/
Slow' in the instrument cluster or 'Set-
tings → Vehicle → Door/liftgate →
Power liftgate Opening Speed → Fast/
Slow' in the infotainment system.
(Default setting is 'Fast')
Power liftgate opening height
To adjust the power liftgate opening
height, select 'User Settings → Door/lift-
gate → Power liftgate Opening Height →
Full Open/Level 3/Level 2/Level 1/User
Height Setting' in the instrument cluster
or 'Settings → Vehicle → Door/liftgate →
Power liftgate Opening Height → Full
Open/Level 3/Level 2/Level 1/User
Height Setting' in the infotainment sys-
tem.
See additional information in supplied
Infotainment Manual.
User height setting
1. Position the liftgate manually to the
height you prefer.
2. Press the power liftgate open/close
button located inside the liftgate for
more than 3 seconds.
If 'User Height Setting' is selected for
the power liftgate opening height, the
power liftgate will automatically open
to the height manually set by you.
INFORMATION
僅 If the power liftgate opening height
has not been manually set, the power
liftgate will fully open when 'User
Height Setting' from the infotainment
system is selected.
僅 If one of the height setting (Full Open/
Level 3/Level 2/Level 1) is selected
from the settings menu in the info-
Power liftgate
5
5 31