僅 Replacing Rear Wiper Blade - Kia Sorento 2023 Owner's Manual

Hide thumbs Also See for Sorento 2023:

Table of Contents

5. Turn vehicle to the ON position and

wiper arms will return to the normal

operating position.

Replacing rear wiper blade

OMQ4PH071013

1. Within 20 seconds after the vehicle is

OFF, pull down the wiper lever to

MIST position for over 2 seconds until

the wiper moves down to the bottom

middle part.

2. Raise the wiper arm and pull out the

wiper blade assembly.

3. Lift up the wiper blade, and pull the

blade to remove it.

4. Install the new blade assembly by

inserting the center part into the slot

in the wiper arm until it clicks into

5. Make sure the blade assembly is

installed firmly by trying to pull it

If the replacement is complete, put

down the wiper arm to place it on the

rear windshield, and turn the ENGINE

START/STOP button to ON and oper-

ate the wipers to check the blade is

installed correctly.

To prevent damage to the wiper arms or

other components, have the wiper blade

replaced by an authorized Kia dealer.

Wiper blades

Chapters

Table of Contents