僅 Operating High Beam - Kia Sorento 2023 Owner's Manual

Features of your vehicle
Operating high beam
OMQ4AH040056
To turn on the high beam headlamp:
僅 Push the lever away from you.
The lever will return to its original
position.
The high beam indicator will light
when the headlamp high beams are
switched on.
WARNING
High beams
Do not use high beam when there are
other vehicles in front of or approaching
your vehicle. Using high beam could
obstruct the other driver's vision.
To flash the headlamps:
僅 Pull the lever towards you.
OMQ4AH040054
5 130
It will return to the normal (low beam)
position when released. The head-
lamp switch does not need to be on to
use this flashing feature.
Operating turn signals and lane
change signals
OMQ4AH040057
The ENGINE START/STOP button must
be on for the turn signals to function.
To turn on the turn signals:
僅 Move the lever up or down (A).
The green arrow indicators on the
instrument panel indicate which turn
signal is operating.
They will self-cancel after a turn is
completed. If the indicator continues
to flash after a turn, manually return
the lever to the OFF position.
To signal a lane change:
僅 Move the turn signal lever slightly and
hold it in position (B).
The lever will return to the OFF posi-
tion when released.
If an indicator stays on and does not
flash or if it flashes abnormally, one of
the turn signal bulbs may be burned out
and will require replacement.
One-touch lane change function
To activate a one-touch lane change
function, move the turn signal lever
Lighting