Kia Sorento 2023 Owner's Manual page 200

Features of your vehicle
Reverse parking aid function (if
equipped)
When you shift the gear to the R
(Reverse) position, the outside rear view
mirror(s) will rotate downwards to aid
with driving in reverse.
OMQ4AH040032
The position of the outside rear view
mirror switch (1) determines whether or
not the mirrors will move:
Left/Right: When either the L (Left) or R
(Right) switch is selected, both outside
rear view mirrors will move.
Neutral: When neither switch is selected,
the outside rear view mirrors will not
move.
The outside rear view mirrors will auto-
matically revert to their original positions
if any of the followings occur:
僅 The ENGINE START/STOP button is
placed to either the LOCK/OFF posi-
tion or the ACC position.
僅 The gear is shifted to any position
except R (Reverse).
僅 The remote control outside rear view
mirror switch is not selected.
Auto reverse user settings
If you cannot secure enough visibility
with the angles provided as factory
default conditions, you can readjust and
5 70
store the angles of outside rear view mir-
rors.
The factory default angles of the right
and left rear view mirrors might be set
differently to improve visibility.
1. Set the shift dial SBW to P (Parking).
Make sure that the vehicle is stopped
and the mirrors are not working.
2. Position the lever to L (left) or R (right)
depending on the mirror that you
want to adjust.
3. Step on the brake pedal and turn the
shift dial SBW to R (Reverse).
4. When the downward movement of
the rear view mirror is finished, adjust
the mirror to the desired angle by
pressing the switches, ▼, ▲, ◀, ▶.
5. If you change the shift dial SBW to a
position other than R (Reverse), or
change the rear view mirror selector
lever to the neutral position, and the
automatic return of the mirror is fin-
ished, the adjusted angle will be auto-
matically saved.
6. You can adjust the rear view mirror on
the other side by following the same
procedures (1-5).
How to reset auto reverse user
settings
If you want to change the automatic
control function of rear view mirrors to
factory-default conditions, follow the
steps below.
1. Position the shift dial SBW to P (Park).
Make sure that the vehicle is stopped
and the mirror is not working.
2. Choose the mirror to be adjusted by
positioning the lever to L (left) or R
(right).
3. Step on the brake pedal and turn the
shift dial SBW to R (Reverse).
Mirrors