List Of Message - Canon MK3000 User Manual

List of Message

If a problem occurs while connected to the printer, an error message or warning message will be
displayed on the status monitor. Read the message, and follow the corresponding procedure.
Message
Low ribbon level
Low battery level
No Media
End of Media
End of Ribbon
No ribbon cassette
Media JAM
Cover is Open
Check of the size switch
lever
Cutter Initialization
Error
Head initialization error
Head print position
error
Warmer temperature
rise delay error
Warmer abnormal
temperature error
Solution
The ribbon is running low. Prepare a new ribbon cassette.
For more information, refer to
For more information, refer to
For more information, refer to
For more information, refer to
For more information, refer to
(P.181)"
.
For more information, refer to
You cannot print with the cover open. Close the cover and press
any key.
For more information, refer to
positioned correctly. Proceed? (P.182)"
Press any key. If the same message appears again, contact your
place of purchase.
Turn off the printer and set the warmer again.
If the same message appears again, contact your place of
purchase.
147
"Battery is running low. (P.183)"
"Print media isn't set. (P.181)"
"End of media. (P.181)"
"End of ribbon. (P.182)"
"Ribbon cassette isn't set.
"Feed error (P.183)"
"Size switch lever is not
.
(P.31)
.
.
.
.
.