Cutter Settings; Changing The Set Cut - Canon MK3000 User Manual

Cutter Settings

Changing the Set Cut

This product automatically cuts the print media when printing is fi nished. (Full cut) In addition,
a half cut is made between the tubes and labels after printing, so that you can cut the tubes by
hand or cleanly peel off labels from release paper.
A1 Pump Room
Half cut
■ Changing the Half Cut Settings
The default setting is "(Half Cut) On. "
If you do not want to use a half cut, you can print the cut line (solid/dotted line).
Cut line
Half cut
settings
On
(Default -
Setting)
Off
Off
Line
Dotted
Full cut
Details
After printing, cut lines are added
between tubes and labels.
No cut between tubes or labels
after printing, and no cut line will
be printed.
A solid cut line will be printed
between tubes and labels after
printing.
A dotted cut line will be printed
between the printed tubes and
labels.
88
Print Preview
Pump Room
A1
Half cut
A1 Pump Room
No cut line
A1 Pump Room
Line
A1 Pump Room
Dotted