Table of Contents
Advertisement
Problem
The device does not print
clearly.
The printing is
misaligned.
The printing is missing or
blurred.
Cause/Things to Check
Is the type and size of the print
media selected in the print
settings the same as the print
media actually loaded?
Is the ribbon cassette loaded
correctly?
Is the attachment or label
cassette loaded correctly?
Is the tube twisted or warped?
Is the print media deformed?
Is the tube dirty?
Is there any load on the tube
transport?
174
Solution
Check the loaded print media
and set the print media type
and size correctly.
Remove the ribbon cassette,
remove any slack, and then
(P.19)
reinsert it.
Remove the attachment or
label cassette, and reload it.
(P.21)
Correct any twists or warps
(P.23)
before loading.
If the end of the tube is bent
due to winding or other
reasons, straighten it out or
cut off the bent portion before
loading it into the printer.
Cut off the deformed part of
the print media and reinsert it.
Wipe off any dirt or dust with a
dry cloth. Also, do not use tubes
that have oil or other stains that
cannot be wiped off .
Place the printer and the print
media on the same table (or at
the same vertical position) so
that no load is applied to the
transport.
When using a tube reel, lighten
the load.
Advertisement
Table of Contents
