Table of Contents
Advertisement
5
Use [ ] or [ ] to select the half cut depth adjustment value, and press the
[Enter] key.
The Half Cut Depth can be set in 11 levels:
"Deep (1-5), " "Normal, " and "Shallow (1-5). "
Each time you press [ ], the cut is deepened by
one step.
Each time you press [ ], the cut will become
shallower by one step.
6
Press the [Shift]+[Cancel] keys.
The display returns to the character input
display.
IMPORTANT
• If you make the cut depth deeper than necessary, the cutter and blade receiver will wear out quickly.
NOTE
• If the half cut is too deep even when the cut depth is adjusted to the shallowest setting, the blade
receiver may be worn out. Replace the cutter and blade receiver.
H al f C u t D ep th
(P.156)
92
[
Deep 1
]
Advertisement
Table of Contents
