Table of Contents
Advertisement
[Example] Creating a tube as follows.
Margin (5 mm)
Alignment (Left)
Pump Room
Cut length (40 mm)
1
Press the [Length/Margin] key.
2
Use [ ] or [ ] to select "Cut Length, " and press the [Enter] key.
3
Use [ ] or [ ] to select "Specify, " enter "40.0" (Cut Length), and then press the
[Enter] key.
The value can be set by entering numbers or
using arrow keys ([
Cut length can be entered in the range of 8 mm
to 150 mm (4 mm to 150 mm for label only) in 0.1
mm increments.
Press the [Enter] key to return to the character
input display.
4
Press the [Length/Margin] key.
5
Use [ ] or [ ] to select "Alignment" and press the [Enter] key.
]/[
]).
57
Cut Length
Cut Length
Alignment
Batch Setting
Cut Length
40.0mm
8.0 to 150.0mm
Cut Length
Cut Length
Alignment
Batch Setting
Advertisement
Table of Contents
