Table of Contents
Advertisement
Message
Replace print media.
End of ribbon.
Replace ribbon cassette.
Print head position can't be
initialized.
Print head can't be moved to
print position.
Cut position can't be
initialized.
Size switch lever is not
positioned correctly.
Proceed?
Data check.
Resetting completely
Power turned off when
saving fi le.
Checking saved data.
Power turned off when
loading fi le.
Resetting input data.
Power turned off when
deleting fi le.
Checking saved data.
Details/Solution
Load a new print media and press the [Enter] key to resume
(P.21)
printing.
Replace the ribbon cassette with a new one and press the
[Enter] key to resume printing from the interrupted page.
Press any key. If the same message appears again, contact
your place of purchase.
The size of the print media set on the printing preference
display does not match the position of the size switch lever.
(P.22)
If you select "Yes, " printing will start.
To reset the settings, select "No" and follow the instructions
on the screen to set the size switch lever to the correct
position. Press any key to start printing.
An error has occurred in the data and all settings have
reverted to the settings at the time of purchase. All saved
fi les have also been deleted.
Check the saved fi les. If the data is not saved, re-save it.
The data being entered will be deleted. Re-enter the data.
Check the saved fi les. If the fi le has not been deleted, delete
it.
182
Advertisement
Table of Contents
