Table of Contents
Advertisement
5
Use [ ] or [ ] to select "End value" and enter "10. "
6
Press the [Enter] key.
You will then be returned to the padding
character settings screen.
7
Use [ ] or [ ] to select "None. "
8
Press the [Enter] key.
The display returns to the character input
display. The sequentially numbered control
character (
N
Room. "
When printing is executed, "Pump Room 1"
to "Pump Room 10" will be printed.
NOTE
• Numbering can be set only once per page.
• If you want to cancel the numbering setting, use the [Back Space] key to delete the control character ( N
) of the numbering.
• If you want to set numbering in descending order, such as "10 to 1, " enter "10" for the "Start value" and
"1" for the "End value. "
) will be entered after "Pump
Decimal Settings
Padding character
m p R o o m N N
52
Start value: 1
End value : 10
[ 0 to 999 ]
Advertisement
Table of Contents
