Table of Contents
Advertisement
User Manual
GFK-2849A
Use case 6: Clear Configuration and Exit
1.
2.
3.
4.
Figure 74
5.
3.6.4
IEC 61850 Configurator Error Handling
The IEC 61850 Configurator provides a mechanism to validate the configuration and report
warning or error messages. The feedback zone of the Configurator displays appropriate
messages to explain any configuration errors or warnings or announce the successful
validation of the configuration.
In case of validation failure, you can go through the error or warning list and change the
configuration to fix issues and correct the configuration. The table below provides the list of
Configuration
Right click on an IED in the IEC 61850 Configurator and click Clear, so that no IEDs
are selected.
Right click on IEC 61850 Client and click Validate Configuration.
In the feedback zone, error message appears.
Close the IEC 61850 Configurator directly and exit. The message shown below
appears:
In the window, if you select "Yes", then the entire configuration is cleared and all
previous PPVs are deleted. If you select "No", then the Configurator window remains
open for further configuration.
Chapter 3
Oct 2019
71
Advertisement
Table of Contents
