Table of Contents
Advertisement
User Manual
GFK-2849A
11. In the dialogue box <server name> RCB Assignment, click OK to close. On closure of
Figure 56
12. In the dialogue box <server name> RCB Assignment, click OK to close. The
Figure 57
Configuration
the IEC 61850 Configurator, all required PPVs are generated automatically in the
project. This is shown in the screenshot below, where report-related parameters are
shown as variables. It also includes the normal DO/DA variables, which are part of
the report.
configuration can be downloaded to the RX3i Controller and the controller can be
put in RUN mode. Reports get enabled (see RptEna_RP = 1), if the configuration is
valid. The DO/DA data in the report gets updated based don the trigger options as
set in the client configuration.
Chapter 3
Oct 2019
57
Advertisement
Table of Contents
