Emerson PACSystems RX3i IEC 61850 User Manual page 80

User Manual
GFK-2849A
Figure 75
The equivalent PPV for this is shown in the screenshot below:
Figure 76
Note:
Explicit Creation of ConnectionState
You can also explicitly create the "ConnectionState" variable by using the "Create status
variable(s)" option. This may be required, if you import a previously-created configuration
using "Import Configuration From File..." and the state variable has been manually
removed.
Note:
Configuration
For more information on connection status, refer to section 5.3.1 IED Connection Status.
Each IED has only one "ConnectionState" variable and PPV associated with it. If you click the
"Create status variable(s)" multiple times, the Configurator will only create one variable per
IED.
Chapter 3
Oct 2019
73