Advertisement
GFK-2592D
Introduction
The IC695ACC302 Auxiliary Smart Battery module is an enhanced version of the IC693ACC302 Auxiliary
Battery module. The IC695ACC302 Auxiliary Smart Battery module provides extended volatile memory
backup time compared to that of the standard coin cell batteries for PACSystems CPUs and includes reliable
low battery detection for compatible CPUs.
For details on the operation of specific CPU models, refer to the PACSystems CPU Reference Manual
(GFK-2222).
For additional details on battery installation, operation, safe handling and disposal, and agency certifications,
refer to the PACSystems Controllers Battery and Energy Pack Manual (GFK-2741).
Date Code
The date code is located on the product label at the right bottom edge. The date code consists of four digit s,
such as 1011. The first two digits represent the year of manufacture in the 21
year 2010. The last two digits represent the fiscal week of manufacture for the indicated year (for example
11 stands for fiscal week 11).
Installation Information
While installing the battery to the CPU, first connect the four-pin Male JAE connector on the enabling adapter
cable to the female four-pin JAE connector on the battery module as displayed in the following figure.
(Installing the four-pin connector enables the battery.)
Note:
The battery will begin to drain immediately if attached to the CPU in Power OFF condition. To maximize
battery life, it is recommended that you install the fresh battery after power has been turned ON to the
attached CPU.
Once the enabling adapter cable is connected, the battery starts to drain, even if it is not attached to the
CPU. It is recommended to disconnect the enabling adapter cable from the battery module when the
battery is not in use. Even though the discharge current would be negligible with just the enabling adapter
cable connected, this can affect battery life if left in this condition for long durations.
WARNING
The battery used in this device may present a risk of fire, explosion, or chemical burn if mistreated. Do
•
not short-circuit, crush, disassemble, or dispose of with fire.
Use of a battery not specified by the manufacturer may present a risk of fire or explosion.
•
DANGER
EXPLOSION HAZARD
Do not install or replace the battery module unless the area is known to be non-hazardous.
Safe Handling and Disposal
For safe handling and disposal of dead battery modules, reference the manufacturer's Material Safety Data
Sheet (MSDS) and the Battery Disposal Document included with this product.
Jul 2023
st
century, such as 10 for the
3
Advertisement
