Table of Contents
Advertisement
Installation -
Installation
Before installing your camera, you have to read the following cautions.
1. Make sure the mounting surface can hold up to five times the weight of your camera.
2. Do not let cables get caught in improper places or the electric line cover get damaged. It may cause a
breakdown or fire.
3. When installing your camera, do not allow any unauthorized personnel approach the installation site.
If you have any valuable things under the place, move them away.
Reset
T-W button
Test video output
Reset to the factory default
Press the reset button for five (5) seconds to return the
camera's settings to their factory default values.
Warning:
Pressing the 'Reset' button will cause all settings data
to be lost. If needed, please, make a note for further
installation.
Using the mounting template or the camera itself, mark and
1
drill the necessary holes on the mounting surface.
Pass the wires through and make all necessary connections.
2
See section 'Installation - Cabling' for more information.
Mount the camera to the mounting surface using the screws
3
and anchors provided.
Loosen the pan and tilt stopper screw a slightly before fixing the camera.
SD Card Slot
Use the test video cable to locally check the camera's image
4
and adjust the zoom as needed. You can adjust the zoom
ratio using the T-W button in the camera's console.
WIDE
TELE
7
Zoom out
Zoom in
Advertisement
Table of Contents
