Table of Contents
Advertisement
Setup - Camera setup
Day and night settings
1
2
3
4
5
6
Day and night
1
- Auto: In this mode, the IR cut filter is removed automatically depending on the light condition around.
- Day: In this mode, the IR cut filter is applied to the image sensor all the time.
The camera's sensitivity is reduced in low light conditions but the camera can still produce a clear color reproduction.
- Night: In this mode, the IR cut filter on the image sensor is removed all the time.
The sensitivity will be enhanced in the dark, but the image is black and white.
- Schedule: In this mode, Day / Night mode is converted accordance with the scheduled time.
Color level - The level of light when the camera switches from night mode to day mode when the day/night mode is set to auto.
2
B / W level - The level of light when the camera switches from day mode to night mode when the day/night mode is set to auto.
3
Transition lime - If the day/night mode is set to auto, set the rate at which the camera switches between the modes.
4
If the day/night is set to schedule, set the time of day when the camera switches between the modes.
5
Click 'Save' to save the current settings.
6
Click 'Cancel' to return to the previous setting.
Click 'Default' to settings to the factory defaults.
24
Advertisement
Table of Contents
