Digital Watchdog MEGApix DWC-MB45WiAT User Manual page 36

Setup - Network setup
SMTP settings
1
2
3
4
5
6
7
8
9
10
11
To send images from the camera to an E-mail account, SMTP needs to be setup.
General setting - Enable or disable the SMTP function.
1
Mode - Select security mode of SMTP from plain or SSL / TLS. After checking account setup of your SMTP server,
2
you may select one.
SMTP Server Address - Define the SMTP server address. If the IP Address is incorrect, a message box will be shown.
3
Port - Define the port used in the Plain or SSL / TLS security mode in the above.
4
User ID - Define the User ID to access the SMTP server. Fill out the correct User ID registered in the SMTP server.
5
Password - Define the Password to access the SMTP server. Fill out the correct password registered in the SMTP server.
6
E-Mail Sender - Define the e-mail address of e-mail sender. It will be displayed as the sender when the camera sends an e-mail.
7
E-Mail Receiver - Define the e-mail address of e-mail receiver. It will be displayed as the receiver when the camera sends an
8
e-mail
Title - Define the title of the e-mail when the camera sends an e-mail.
9
The title of the e-mail is limited to 40 characters including the spaces.
Message - Define the contents of e-mail when camera sends an e-mail. The message of the e-mail is limited to 40
10
characters including the spaces.
Click 'Apply' to make above setting effective.
11
36