Setting up measurement status
Setting up synchronization source
Steps
Option
Default value
30
1. Press Setup button.
2. Press Enter button.
3. Press down arrow key to move
cursor to the Sync Source field.
4. Use soft keys to select and confirm
the desired option.
V
Select the voltage of signals as
synchronization source. The SYNC.V status
icon, for example, on the display lights up in
green when V is selected for sync source.
I
Select the current of signals as
synchronization source.
Off
Select the entire interval of data updating
period as synchronization source.
V
T3PM1100 User Manual
Setup
Enter