Teledyne Everywhereyoulook T3PM1100 User Manual page 88

Standard mode
Continuous
mode
88
3. Press the Reset button on the front
panel to clear integrator.
1. Set integrator measurement time before using
integrator function.
2. Other steps are same as running in manual
mode.
When integrator performing, the test time will
increase until the setting integrator
measurement time.
1. Set integrator measurement time before using
integrator function.
2. Other steps are same as running in manual
mode.
When integrator is running, the test time will
increase until the set integrator measurement
time (a cycle) and repeat the cycle indefinitely
T3PM1100 User Manual
Reset