:RECall:LIST:VALue
Description
Query Syntax
Parameter
Example
:RECall:PANel
Description
Syntax
Parameter
Example
186
Returns the numeric list data of harmonic
measurement at the specified block number.
:RECall:LIST:VALue? {<NRf>}
<NRf>
1 to 1000 (block number)
• if <NRf> is specified,the numeric list data at the
specified block number will be returned.
• If you omit <NRf> or specify a number greater than
the number of blocks that contain stored measured
data (the number returned by :RECall:NUMber?), the
entire returned numeric data will be "NAN" (no data).
• The output items and format are the same as those
of ":NUMeric:LIST:VALue? (when the item number is
not specified)." To set the output items and format,
use the NUMeric group commands.
Loads a setup parameter file.
:RECall:PANel {<NRf>}
<NRf>
1 to 4 (file number)
:RECall:PANel 2
T3PM1100 User Manual
Query
Set