Setting Up Line Filter - Teledyne Everywhereyoulook T3PM1100 User Manual

Setting up line filter

Steps
Option
Default value
1. Press Setup button.
2. Press Enter button.
3. Press down arrow key to move
cursor to the Line Filter field.
4. Use soft keys to select and confirm
the desired option.
On Turn on the line filter function, which is
inserted into voltage and current
measurement input circuits and affects
voltage, current as well as power
measurements without high frequency
components included within measured
values. The L.F status icon on the display
lights up in green.
Off Turn off the line filter function. The cutoff
frequency is 500Hz.
Off
BASIC SETTING
Setup
Enter
31