Setting Notes - Siemens SIPROTEC 7SJ61 Manual

Multi-functional protective relay with bay controller

Hide thumbs Also See for SIPROTEC 7SJ61:

Table of Contents

2.15 Phase Rotation

Setting Notes

Setting the Function Parameter

The normal phase sequence is set at 209 (see Section 2.1.3). If, on the system side, phase rotation is reversed

temporarily, then this is communicated to the protective device using the binary input „>Reverse Rot."

SIPROTEC, 7SJ61, Manual

C53000-G1140-C210-1, Release date 02.2008