Advertisement
STEP 1: (VEHICLE PREP CONT'D.)
1.18 Tilt the seat forward.
1.19 Disconnect 2-pin connector from the underside of
the seat
Remove harness clip from the seat frame
Remove/set aside spring lock pin from prop rod.
While holding the seat, remove the prop rod from
the seat frame and set the seat back down. See
Figure 1.19.
Tools required
Needle Nose Pliers
1.20 Remove and save seat frame hinge bolts and nuts
per Fig. 1.20. Remove seat from vehicle.
Tools required
13mm socket and wrench
CAB INSTALLATION
Fig. 1.18 (Tilt Seat Forward)
Spring
Prop Rod
Locking Pin
Harness Clip
Fig. 1.19 (Disconnect Seat Connector & Prop Rod)
Remove and Set Aside
Fig. 1.20 (Remove Front Hinge Bolts)
8 of 34
Seat Latch Bar
Disconnect
Seat Harness
Advertisement
