Advertisement
STEP 1: (VEHICLE PREP CONT'D.)
1.28 Re-install seat with seat pan assembly back onto
the vehicle by re-installing OEM hinge bolts and
nuts per figure 1.28.
Tools required
13mm socket and wrench
1.29 Tilt the seat forward, while holding the seat, re-
install the prop rod to the seat frame and re-install
spring lock pin. Next, reconnect 2-pin connector
from the underside of the seat and re-install the
harness clip to the seat frame. Lower the seat
back down. See Figure 1.29.
Tools required
Needle Nose Pliers
1.30 Install left and right R.O.P.S. brackets onto the
vehicle's R.O.P.S. See Figures 1.30a and 1.30b.
Hardware Used
5/8-11X1-1/4" Hex Flange Bolt
5/8-11 Flange Hex Lock Nut
Tools required
15/16" wrench and socket
Fig. 1.30b (Install R.O.P.S bracket, right)
CAB INSTALLATION
Qty
4
4
Re-Install
Fig. 1.28 (Re-Install Seat with Seat Pan)
Reconnect
Seat Harness
Harness Clip
Spring
Locking Pin
Prop Rod
Fig. 1.29 (Reconnect Seat Connector & Prop Rod)
Fig. 1.30a (Install R.O.P.S bracket, left)
11 of 34
Advertisement
