Advertisement
STEP 2: (CAB INSTALLATION)
2.14 Slide the seat rearward then tilt seat forward.
2.15 Install right filler onto the cab from the outside
using provided hardware per Figure 2.15. Note:
side screws have lock nuts on the inside.
Hardware Used
5/16-18X3/4" Flange Hex Screw
5/16-18 Flange Lock Nut
Tools required
1/2" wrench and socket
2.16 Install left filler onto the cab from the inside using
provided hardware per Figures 2.16a and b.
Hardware Used
5/16-18X3/4" Flange Hex Screw
Tools required
1/2" wrench and socket
2.17 Apply P.S.A. Velcro on the left fender up the left
filler per Figure 2.17. Continue the Velcro on the
lower edge of the window.
Tools required
Scissors
Apply Velcro
Here
Fig. 2.17 (Apply Velcro to Left Filler and Fender)
CAB INSTALLATION
Qty
4
2
Qty
5
Into Inserts
Fig. 2.15 (Install Right Filler)
Install
Fig. 2.16a (Install Left Filler, Inside View)
Install
Fig. 2.16b (Install Left Filler, Outside View)
16 of 34
Into Lock Nuts
Advertisement
