Advertisement
STEP 2: (CAB INSTALLATION)
2.37 Lower the seat down.
2.38 Turn on vehicle and test operation of the A/C Unit.
If the A/C Unit does not function properly, check
out the "Troubleshooting" section of this manual.
See Figure 2.38 for basic A/C operation.
2.39 Next, install any accessories purchased for this
vehicle.
2.40 The cab installation is now complete.
CAB FEATURES & OPERATION
AIR CONDITIONING OPERATION
See Figure 2.38 above. Turn the 4 -position ventilation switch
to activate the blower. This can be used as just a blower with
the A/C compressor turned off.
Rotate the A/C switch to the desired temperature setting to
turn the compressor on/off.
In order for the A/C compressor to function, the vehicle
throttle must be set at full speed.
The blower must be turned on in order for the A/C
compressor to function.
AIR FILTER CHECK
Remove the two thumbscrews on the face of the A/C and
slide the drawer out to access the air filter.
Change the filter as needed based on operating conditions.
CAB INSTALLATION
Set Blower Speed
Set Temperature
Fig. 2.38 (Test A/C Unit Functionality)
Thumbscrews
Air Filter Access
24 of 34
Advertisement
