Notes On Ce Marking; Intended Use - MICRO-EPSILON optoNCDT 1900 PROFINET Operating Instructions Manual

Safety
Avoid constant exposure of the sensor to splashes of water.
> Damage to or destruction of the sensor
Avoid exposure of sensor to aggressive media (detergents, cooling emulsions).
> Damage to or destruction of the sensor
1.3

Notes on CE Marking

The following apply to the optoNCDT 1900 measuring system:
- EU Directive 2014/30/EU
- EU Directive 2011/65/EU
Products which carry the CE mark satisfy the requirements of the EU directives cited and the relevant applicable harmonized Euro-
pean standards (EN). The measuring system is designed for use in industrial environments.
The EU Declaration of Conformity and the technical documentation are available to the responsible authorities according to the EU
Directives.
1.4

Intended Use

- The optoNCDT 1900 is designed for use in industrial and laboratory applications. It is used for
ƒ Measuring displacement, distance, position and thickness
ƒ Monitoring quality and checking dimensions
- The sensor must only be operated within the values specified in the technical data see Chap. 3.3.
- The sensor must be used in such a way that no persons are endangered or machines are damaged in the event of malfunction or
total failure of the sensor.
- Take additional precautions for safety and damage prevention in case of safety-related applications.
optoNCDT 1900 / Profinet Page 8